Basic assembly process of electronic screens and the Main components of electronic screens

 Friends, I will introduce to you the basic assembly process of electronic screens and the main components of electronic screens:

Display: including LCD, OLED, etc., used to display images and text.

Control board: including main control board, peripheral board, etc., used to control various functions of the display, such as brightness, contrast, color and other adjustments.

Display driver chip: The circuit responsible for controlling the display screen and converting image data in the computer into digital signals that can be displayed on the display screen.

Bracket: used to fix the display and control board.

•  Lay the electronic screen flat on the workbench, place the display face down, and hold the edge of the display with your hands so that it cannot move.

•  Peel off the protective film from the four corners of the display and turn the display over.

•  Place the stand on the workbench, place the display in the slot of the stand, and ensure that the four corners of the display are tight.

• Fix the control board on the display bracket, paying attention to the position and direction of the fixing screws to ensure they are not loose.

• When fixing the display driver chip to the control board, you also need to pay attention to the position and direction of the fixing screws.

• Fasten the screws on the bracket to ensure that the bracket does not wobble.

• Connect the power adapter and monitor cable to the corresponding interfaces on the electronic screen.

• Turn on the power switch of the electronic screen and conduct a test.

  
  

It should be noted that the above steps are only the basic assembly process, and the specific steps may vary depending on the brand, model, assembly environment and other factors.

If it is your first time to assemble an electronic screen, it is recommended that you read the product manual carefully or search for relevant tutorials online to learn.